Enviro M55C-FPI Bedienungshandbuch PDF herunterladen (Seite 26)

Installation

inSide veRticaL inStaLLationS:

1. Install a tee or 90° elbow on the inside of the house.

2. Install PL vent upward from the tee. Make sure that you install support brackets to keep the vent

straight and secure. All joints in the exhaust venting system must be fastened with at least three (3)

screws.

3. Install ceiling thimble and secure the flashing as you go through the roof.

4. Ensure that the rain cap is approximately 24” (61 cm) above the roof.

NOTE - This venting configuration is only for use with the Built-In installation.

Rain cap

Flashing

24"

(61 cm)

Tee or 90°

elbow

3" (7.5 cm)

Clearance

Support

bracket

Type "L"

vent

Figure 14: Inside Vertical Venting.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 36 37

Keine Kommentare

Enviro M55C-FPI Bedienungshandbuch Seite 26